OIL PAN 14244T GM (CHEVY) 4.3-LITER "LATER MODELS"
$160.00 $129.95 On Sale!
18-0616
OIL PAN 18-0616 GM (CHEVY) 4.3-LITER "LATER MODELS", GM CHEVY) 4.3-LITER, V-6 ENGINE WITH 1-PIECE REAR MAIN SEAL. REPLACES MERCUISER OIL PAN # 14244 & 14244T, USE GASKET # FEL17971.
|
FEL-PRO 17971 OIL PAN SET GM (CHEVY) 4.3-LITER "LATER MODELS"
$114.60 $69.95 On Sale!
FEL17971
FEL-PRO 17971 OIL PAN SET GM (CHEVY) 4.3-LITER "LATER MODELS". GASKET IS ONE PIECE FOR GM (CHEVY)4.3-LITER, V-6 ENGINE WITH 1-PIECE REAR MAIN SEAL. REPLACES MERCRUISER GASKET # 27-14247.
|
5006166 OIL PAN GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {PORT INDENT}
$169.95
5006166
5006166 OIL PAN GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {PORT INDENT}, Fits 5.0 and 5.7-Liter GM (Chevy) V-8 engines (1980 & older) with 2-piece rear main seal, PORT side dipstick indent on engine block, no windage tray. This pan is (OMC) original equipment and is supplied with oil pan gasket.
|
SIERRA 18-0153 OIL PAN SET GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {PORT INDENT}
$31.49 $28.34 On Sale!
18-0153
SIERRA 18-0153 OIL PAN SET GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS", 4-PIECE GASKET FOR ENGINES WITH 2-PIECE REAR MAIN SEAL, AND OIL DIP STICK "INDENT" IS ON PORT SIDE OF ENGINE BLOCK. (Also Gasket for Oil Pan 5006166).
|
MERCRUISER 94130 OIL GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {STARBOARD INDENT}
$149.00 $119.95 On Sale!
BJM6501
SILVER SEALS 6501 REPLACEMENT FOR MERCRUISER 94130 OIL PAN for GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {STARBOARD INDENT}, windage tray built into oil pan, 2-piece rear main seal. Early 80's models to 1985, uses 4-piece oil pan gasket, starboard side dipstick Indent on engine block. Pan has a built in windage tray. REQUIRES GASKET #18-0411(order separately).
|
MERCRUISER 93476 OIL GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {STARBOARD INDENT}
$149.00 $129.95 On Sale!
18-0613
SIERRA # 18-0613 REPLACEMENT FOR MERCRUISER 93476 OIL PAN, FITS GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {STARBOARD INDENT}, NO WINDAGE TRAY BUILT INTO OIL PAN. Fits: GM (Chevy) Small Block V-8 engines with 2-piece rear main seal. Early 80's models to 1985, uses 4-piece gasket, starboard side dipstick Indent on engine block. Pan does not have windage tray built into pan. REQUIRES GASKET #18-0411(order separately).
|
SIERRA 18-0411 OIL PAN SET GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS" {STARBOARD INDENT}
$22.99 $20.69 On Sale!
18-0411
SIERRA 18-0411 OIL PAN SET GM (CHEVY) 5.0 & 5.7-LITER "EARLY MODELS", 4-PIECE GASKET FOR ENGINES WITH 2-PIECE REAR MAIN SEAL, AND OIL DIP STICK "INDENT" IS ON STARBOARD SIDE OF ENGINE BLOCK. Use with oil pans 94130,
93476, BJM6501 and 18-0613.
|
809910 OIL PAN GM (CHEVY) 5.0 & 5.7-LITER "LATER MODELS"
$213.00 $179.95 On Sale!
BAR55-1609
OIL PAN BARR # 55-1609 GM (CHEVY) 5.0 & 5.7-LITER "LATER MODELS". FITS: Late Model GM (Chevy) Small Block V-8 305 (5.0-Liter)and 350 (5.7-Liter) engines with 1-piece rear main seal, no windage tray built into pan. Starboard side dipstick indent on engine block, oil drain plug is located bottom center of oil pan.
Replaces Mercruiser part# 809910 and 805930A1, OMC part # 988222,
Uses 1-piece pan gasket #18-1237 (order separately).
|
SIERRA 18-1237 OIL PAN SET GM (CHEVY) 5.0 & 5.7-LITER "LATER MODELS"
$38.00 $34.19 On Sale!
18-1237
SIERRA 18-1237 OIL PAN SET GM (CHEVY) 5.0 & 5.7-LITER "LATER MODELS", {approximately 1989 and newer},
GASKET IS 1-PIECE MOLDED RUBBER, FOR ENGINES WITH 1-PIECE REAR MAIN SEAL AND OIL DIPSTICK "INDENT" ON STARBOARD SIDE OF ENGINE BLOCK. Use with oil pans BJM809910 and Sierra # 18-0612.
|
809910 OIL PAN "KIT" GM (CHEVY) 5.0 & 5.7-LITER "LATER MODELS"
$293.50 $254.95 On Sale!
BAR55-1600
809910 OIL PAN "KIT" GM (CHEVY) 5.0 & 5.7-LITER "LATER MODELS", FITS: Late Model GM (Chevy) small block V-8 305 (5.0-Liter)and 350 (5.7-Liter) engines with 1-piece rear main seal, Starboard side dipstick indent on engine block, oil drain plug is located bottom center of stamped steel oil pan.
Uses 1-piece pan gasket. Replaces Mercruiser part# 809910 and 805930A1, OMC # 988222. Supplied with oil pan, windage tray, oil pan gasket and mounting bolts.
|
93477T OIL PAN GM (CHEVY) 454 AND 502 GEN IV
$180.00 $149.95 On Sale!
18-0615
93477T OIL PAN GM (CHEVY) 454 AND 502 GEN IV ENGINES WITH 2-PIECE REAR MAIN SEAL. PAN HAS WINDAGE TRAY BUILT-IN, STARBOARD SIDE DIP STICK TUBE. Replaces mercruiser #93477, 93477T and OMC # 986762. Use gasket # FEL17985.
|
FEL-PRO 17985 OIL PAN SET GM (CHEVY) 454 AND 502 GEN IV
$48.80 $29.89 On Sale!
FEL17985
FEL-PRO 17985 OIL PAN SET GM (CHEVY) 454 AND 502 GEN IV BIG BLOCK, 7.4 AND 8.2-LITER GEN IV ENGINES WITH 2-PIECE REAR MAIN SEAL AND 4-PIECE OIL PAN GASKET. Replaces Mercruiser part # 27-52550
and Mallory # 9-61501.
|
845668T OIL PAN 7.4-LITER GM (CHEVY) GEN-5
$220.00 $189.95 On Sale!
18-0614
18-0614 SIERRA OIL PAN, REPLACES GM (Chevy) 454 CU.IN. AND 7.4-LITER (GM) CHEVY ENGINES GEN-V with 1-PIECE REAR MAIN SEAL, RIGHT HAND DIPSTICK. REPLACES MERCURY MARINE PART NUMBERS 811549, 850458 AND 845668T. PAN HAS A WINDAGE TRAY, OIL DRAIN PLUG IS IN CENTER REAR BOTTOM OF PAN. DEPTH TAPERS FROM REAR OF PAN 8-1/2" DEEP TO 9" DEEP 3/4 OF THE WAY TOWARDS FRONT OF PAN.
|
FEL-PRO 17986 OIL PAN GASKET 7.4 & 8.2-LITER GEN V & VI
$106.00 $64.89 On Sale!
FEL17986
FEL-PRO 17986 OIL PAN GASKET 7.4 & 8.2-LITER GEN V & VI, 1-PIECE MOLDED RUBBER GASKET. GM (Chevy) 7.4 & 8.2-LITER BIG BLOCK ENGINES WITH 1-PIECE REAR MAIN SEAL, GEN-V & VI. REPLACES MERURY PART #'S 27-811566, 27-845628 AND MALLORY # 9-61508. FITS SIERRA OIL PAN 18-0614.
|
MERCRUISER 71938A1 OIL PAN FOR 3.7-Liter (Aluminum Block Engine)
$397.88 $359.95 On Sale!
71938A1
MERCRUISER 71938A1 Original Equipment OIL PAN FOR 3.7-Liter (Aluminum Block Engine), 4 cylinder Models:(470, 165, 170, 180, 185, 190, 485),
Note: This is NOT a GM (Chevy) Engine, this is Mercury Marine's Fresh Water Cooled Aluminum Block Engine. If Needed order pan Gasket # 18-4366.
|
SIERRA 18-4366 GASKET SET OIL PAN (MERCRUISER 3.7-LITER)
$64.99 $58.49 On Sale!
18-4366
SIERRA 18-4366 GASKET SET OIL PAN (MERCRUISER 3.7-LITER), REPLACES Mercruiser MCM # 27-72479A5 oil pan gasket set. Mercruiser 3.7-Liter (224 cu.in.) 4 cylinder aluminum block engine. Gasket kit also includes the inspection side gasket and valve cover gasket. This kit is required when replacing 71938A1 oil pan.
|
