JABSCO 1 QUART ACCUMULATOR TANK
$56.95
ITT12573-3000
A simple to install, economical tank that will improve the operation of any pressurised water system. 1 QUART.
|
JABSCO PRESSURIZED 1 LITER ACCUMULATOR TANK
$59.95
ITT30573-0000
Internal bladder reduces pulsating and rapid on/off pump cycling. Pressurized to 10psi, but can be adjusted with a standard bicycle pump.
|
JABSCO "PAR MAX 3" PUMP (3.5-GPM)
$119.95
ITT31600-0092
3.5 gpm (13.2 lpm) open flow output.
Self-priming up to 10ft (3m).
Four piston diaphragm sealed for smooth and quiet operation.
Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
Diaphragm design allows extended dry running.
Pressure switch cut-in 15 psi (1.0 bar), cut-out 25 psi (1.7 bar), low pressure, or cut-in 20 psi (1.4 bar) cut-out 40 psi (2.8 bar), high pressure.
Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
|
JABSCO AUTOMATIC WATER PRESSURE PUMP
$389.75
ITT36800-1000
FLOW 3.3 GPM, Designed specifically to supply a reliable, smooth and steady flow of
water on boats with three to four water fixtures. Built-in check valve
protection against city water pressure (automatic switch maintains 39 psi
pressure); pulsation dampeners to absorb water hammer, battery
conserving low amperage motors, and
ports sized to take 1/2" - 5/8" ID hose.
Salt water system compatible for
galley rinse water and deck and
anchor wash down. Height 8 1/4",
Width 5 1/2", Length 8 5/16".
|
JABSCO WATER PRESSURE SYSTEM PUMP
$429.95
ITT36900-1000
A well established and service proven pump for larger boats with
three to four fixtures.
Designed with noise reducing belt drive and flexible mount, and water hammer
absorbing pulsation dampeners for smooth flow. Has built-in check valve protection
against city water pressure — the automatic switch maintains 39 PSI pressure.
Low maintenance. Run dry capability. Low amp. motor conserves battery. Ports fit
1/2" and 5/8" ID hose.
|
JABSCO ELECTRIC FAUCET
$33.49
ITT42520-0000
STAINLESS STEEL SWING SPOUT, ON/OFF SWITCH BUILT INTO FAUCET BASE.
|
JABSCO "PAR MAX 1" PUMP (1.1-GPM)
$69.95
ITT42630-2900
1.1 gpm (4.3 lpm) open flow output.
Self-priming up to 5ft (1.2m).
Dual diaphragm operation.
Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
Diaphragm design allows dry running.
Pressure switch cut-in 22 psi (1.5 bar), cut-out 35 psi (2.4 bar).
Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
|
JABSCO "PAR MAX 2" PUMP (2.3-GPM)
$129.95
ITT46010-2900
2.3 gpm (4.3 lpm) open flow output.
Self-priming up to 5ft (1.2m).
Dual diaphragm operation.
Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
Diaphragm design allows dry running.
Pressure switch cut-in 22 psi (1.5 bar), cut-out 35 psi (2.4 bar).
Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
|
JABSCO PAR MAX -4 (4.3-GPM)
$226.00 $139.95 On Sale!
ITT31620-0092
4.3 gpm (13.2 lpm) open flow output.
Self-priming up to 10ft (3m).
Four piston diaphragm sealed for smooth and quiet operation.
Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature.
Diaphragm design allows extended dry running.
Pressure switch cut-in 15 psi (1.0 bar), cut-out 25 psi (1.7 bar), low pressure, or cut-in 20 psi (1.4 bar) cut-out 40 psi (2.8 bar), high pressure.
Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
|
JABSCO ELECTRIC GALLEY PUMP (1-GPM)
$36.35
ITT42510-0000
The economical answer to running water at the turn of a switch. Quiet
operation electric pump is compact, easy to install, draws only 1.6 amps
at 12 volts and pumps 1 GPM at 3 psi.
|
JABSCO Electric Galley Pump & Faucet COMBO
$59.95
ITT42530-0000
The economical answer to running water at the turn of a switch. Quiet
operation electric pump is compact, easy to install, draws only 1.6 amps
at 12 volts and pumps 1 GPM at 3 psi. Stainless Steel swing spout, on/off switch built into faucet base.
|
JABSCO "FLUSH" REGULATOR
$39.95
ITT44410-1000
Protect your boat water system appliances and pump
from damaging pressures of unregulated marina water
hookups. Reduce high water pressures (up to 100 psi
down to 35 psi. Built-in blackflow preventer. Easy to install.
Easy-clean in-line filter. Two models: a permanently
installed flush mount model and in-line model with brass
garden hose fittings that connect dockside water entry
and garden hose water hookup.
|
JABSCO IN-LINE REGULATOR
$31.79
ITT44410-1010
Protect your boat water system appliances and pump
from damaging pressures of unregulated marina water
hookups. Reduce high water pressures (up to 100 psi
down to 35 psi. Built-in blackflow preventer. Easy to install.
Easy-clean in-line filter. Two models: a permanently
installed flush mount model and in-line model with brass
garden hose fittings that connect dockside water entry
and garden hose water hookup.
|
JABSCO "FLUSH" WATER PRESSURE REGULATOR
$32.69
ITT44411-1045
Limits inlet water pressure to 45 psi (3.1 bar).
Maintains regulated pressure at various flow rates.
Compact in-line model only 3" (77mm) long.
Flush model has unique swivel elbow output.
Manufactured of food-grade materials.
Meets all applicable codes and approvals.
Removable strainer protects plumbing. COLOR: WHITE
|
JABSCO "FLUSH" WATER PRESSURE REGULATOR
$36.49
ITT44411-2045
Limits inlet water pressure to 45 psi (3.1 bar).
Maintains regulated pressure at various flow rates.
Compact in-line model only 3" (77mm) long.
Flush model has unique swivel elbow output.
Manufactured of food-grade materials.
Meets all applicable codes and approvals.
Removable strainer protects plumbing. COLOR: CHROME
|
JABSCO Pumpguard In-line Strainer
$13.95
ITT46400-0002
Kit Pumpguard In-line 1/2"HB (13mm) SS ID hose. Prevents unnecessary pump breakdowns caused by particles in the water.
Transparent housing allows instant inspection.
Quick, in-place, cleaning of the 40 mesh stainless steel screen.
|
JABSCO Pumpguard Plug-In Strainer
$13.95
ITT46400-0010
Kit Pumpguard Plug-In (19mm) ID hose x Plug-in 40 mesh SS 90 degree. Prevents unnecessary pump breakdowns caused by particles in the water.
Transparent housing allows instant inspection.
Quick, in-place, cleaning of the 40 mesh stainless steel screen.
|
JABSCO Pumpguard Plug-In Strainer
$13.95
ITT46400-0014
Kit Pumpguard Plug-In 1/2" Qest, 14 pipe inlet 90 degree and direct plug into PAR-Max inlet port. Prevents unnecessary pump breakdowns caused by particles in the water.
Transparent housing allows instant inspection.
Quick, in-place, cleaning of the 40 mesh stainless steel screen.
|
