BLUE SEA BusBar 150 Ampere Common Bus
$15.49
BLU2301
The industry standard bus for hot distribution or negative
collection circuits. BusBar 10 x 8-32 Screw Terminal
|
BLUE SEA BusBar 150 Ampere
$23.19
BLU2302
Continuous Amperage 150 Amperes DC
130 Amperes AC
Voltage Rating 48 Volts DC Maximum
300 Volts AC Maximum. BusBar 20 x 8-32 Screw Terminal
|
BLUE SEA BusBar 150 Ampere
$20.39
BLU2303
Continuous Amperage 150 Amperes DC
130 Amperes AC
Voltage Rating 48 Volts DC Maximum
300 Volts AC Maximum. BusBar 4 x 1/4" Stud Terminal
|
BLUE SEA Independent Connectors
$3.95
BLU2404
Closed back design completely insulates power from the
mounting surface, Each screw pair is 1 isolated circuit, Jumpers allow creation of common circuits. Terminal Block 4 circuit
|
BLUE SEA Independent Connectors
$5.39
BLU2406
Closed back design completely insulates power from the
mounting surface, Each screw pair is 1 isolated circuit, Jumpers allow creation of common circuits .Terminal Block 6 circuit
|
BLUE SEA Independent Connectors
$6.25
BLU2408
Closed back design completely insulates power from the
mounting surface, Each screw pair is 1 isolated circuit, Jumpers allow creation of common circuits. Terminal Block 8 circuit
|
BLUE SEA Independent Connectors
$7.95
BLU2410
Closed back design completely insulates power from the
mounting surface, Each screw pair is 1 isolated circuit, Jumpers allow creation of common circuits. Terminal Block 10 circuit
|
BLUE SEA DualBus 100 Ampere
$16.69
BLU2701
Combines negative and positive buses on one block. DualBus 5 x 8-32 Screw Terminal
|
BLUE SEA DualBus 100 Ampere
$21.69
BLU2702
Combines negative and positive buses on one block. DualBus 10 x 8-32 Screw Terminal
|
BLUE SEA Cover, BusBar 2301/2303
$5.95
BLU2706
Cover, BusBar 2301/2303
|
BLUE SEA Cover, BusBar 2302
$7.95
BLU2707
Cover, BusBar 2302
|
BLUE SEA Cover, Connector DualBus 2701
$8.19
BLU2709
Cover, Connector DualBus 2701
|
BLUE SEA Cover, Connector DualBus 2702
$9.49
BLU2710
Cover, Connector DualBus 2702
|
BLUE SEA ANL Fuse Block Systems
$58.69
BLU5003
750 Ampere rating achieved with large heat dissipating tin-plated copper mounting blocks, Clear Lexan® cover insulates all conductive parts, satisfying ABYC/USCG requirements, For use on systems up to 32V DC, 5/16” stud terminals accept wire ring terminals up to 0000 AWG
|
BLUE SEA 750 ANL Fuse Block Systems
$18.79
BLU5005
300 Ampere rating, Supplied terminal boots insulate all conductive parts satisfying USCG/ABYC requirements, For use on systems to 32V DC, 5/16” stud terminals accept wire ring terminals up to 00 AWG
|
BLUE SEA MAXI™ Fuse Block System
$20.79
BLU5006
The most economical system for 30–80 Ampere fusing
Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements
Accepts wire sizes 18–4 AWG from sides or bottom
For use on systems up to 32V DC
Ring terminal screws compress fuse blades within blocks forextremely low resistance connections
|
BLUE SEA CLASS T Fuse Block System
$61.19
BLU5007
"The fuse system recommended by most inverter
manufacturers for high speed response to short
circuits", Clear Lexan® cover insulates all conductive parts, satisfying
ABYC/USCG requirements
For use on systems up to 160V DC
Large stud terminals (3/8” on 5002, 5/16” on 5007) accept ring
terminals for wire up to 0000 AWG
Large heat dissipating tin-plated copper mounting blocks Two #8 accessory terminals located on each end
|
BLUE SEA 3AG Fuse Block System W/ GROUND
$31.19
BLU5015
Clear insulating cover with label recesses for standard Blue Sea Systems’ labels Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses, Tin-plated copper buses and Beryllium copper fuse clips give full 30 Ampere rating per circuit, Uses AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses. Fuse Block 3AG 6 circuit with ground
|
BLUE SEA 3AG Fuse Block System W/O GROUND
$27.69
BLU5018
Clear insulating cover with label recesses for standard Blue Sea Systems’ labels, Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses, Tin-plated copper buses and Beryllium copper fuse clips give full 30 Ampere rating per circuit, Uses AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses, Fuse Block 3AG 6 circuit without ground
|
BLUE SEA Waterproof Fuse Holders
$3.99
BLU5020
Waterproof fuse holder will withstand water exposure normally
encountered in above deck applications: salt spray, rain, hose
washdown, or momentary immersion. Fuseholder AGC Waterproof, Replacement.
|
BLUE SEA Screw Terminal Blade DC Fuse Block
$45.19
BLU5026
Clear insulating cover with label recess for small format
Blue Sea Systems’ labels, Cover insulates all conductive parts, satisfying ABYC/USCG requirements, Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit, Accepts ATO and ATC fast acting blade type fuses. 12 circuit with ground
|
BLUE SEA Screw Terminal Blade DC Fuse Block
$36.19
BLU5025
Clear insulating cover with label recess for small format
Blue Sea Systems’ labels, Cover insulates all conductive parts, satisfying ABYC/USCG requirements, Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit, Accepts ATO and ATC fast acting blade type fuses. 6 circuit with ground
|
BLUE SEA CableClams
$16.65
BLU1001
Waterproof co-axial installation without removing connectors, Save the expense of removing and replacing connectors, Avoid poor connections from removing factory connectors. CableClam 0.625" Connector Opening
|
BLU SEA CableClams
$17.25
BLU1002
Waterproof co-axial installation without removing connectors, Save the expense of removing and replacing connectors, Avoid poor connections from removing factory connectors, CableClam 0.825" Connector Opening
|
blue sea CableClams
$18.95
BLU1003
Waterproof co-axial installation without removing connectors, Save the expense of removing and replacing connectors, Avoid poor connections from removing factory connectors, CableClam 1.385" Connector Opening
|
BLUE SEA CableGrips
$17.69
BLU1005
Pass electrical cables and small hoses through bulkheads, Waterproof, Vaporproof—for LPG hose exits and gas vapor areas, Strain relieving, Surface mounts on any thickness material, CableGrip small 9/16"–11/16"
|
BLUE SEA CableGrips
$19.29
BLU1006
Pass electrical cables and small hoses through bulkheads, Waterproof, Vaporproof—for LPG hose exits and gas vapor areas, Strain relieving, Surface mounts on any thickness material, CableGrip large 3/4"–1"
|
BLUE SEA PowerPost High Amperage
$9.95
BLU2003
Connect high amperage cables securely, PowerPost 3/8"
|
BLUE SEA Rotating CableCaps
$4.69
BLU4001
Top rotates 360 degrees to allow cable entry from any angle, For batteries with integral marine wing nut posts, Fits all cable sizes.
|
BLUE SEA Standard CableCaps
$3.39
BLU4005
For batteries with marine adaptor terminals added on, Cable size: 4,2,1.
|
BLUE SEA Standard CableCaps
$3.39
BLU4006
For batteries with marine adaptor terminals added on, Cable size: 1/0, 2/0.
|
BLUE SEA CableCap Stud Insulators
$2.39
BLU4008
Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices, Cable size 18-10, color red.
|
BLUE SEA CableCap Stud Insulators
$2.39
BLU4010
Insulate stud type connectors on alternators, starters, windlasses and
other high amperage devices, Cable size 8-4, color red.
|
BLUE SEA CableCap Stud Insulators
$2.39
Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices, Cable size 2-2/0, color red.
|
BLUE SEA Automotive CableCaps
$3.95
BLU4017
Designed to fit standard automotive posts, Cable size: 1/0, 2/0.
|
BLUE SEA Independent Connector Jumpers
$3.75
BLU9216
Jumpers allow creation of common circuits on independent
connectors. Jumper 2600 Series
|
BLUE SEA Independent Connector Jumpers
$3.75
BLU9217
Jumpers allow creation of common circuits on independent
connectors, Jumper 2500 Series
|
BLUE SEA Independent Connector Jumpers
$3.75
BLU9218
Jumpers allow creation of common circuits on independent
connectors, Jumper 2400 Series
|
