ATTWOOD SAHARA AUTOMATIC BILGE PUMPS
Sahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from leaking through insulation jacket. All materials and components are state-of-the-art – Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance.
|
Sahara S500 gph 12-volt
$51.29
ATT4505-7
Sized for boats up to approximately 17 feet. 500 GPH at open flow, 350 GPH at 3.3' head. Draws only 1.5 amps at open flow! 3/4" hose outlet.
|
Sahara S750 gph 12- volt
$77.29
ATT4507-7
S750 is sized for larger recreational boats. Our most powerful 3/4"-outlet automatic pump! 750 GPH at open flow, 625 GPH at 3.3' head. 3/4" hose outlet.
|
Sahara S1100 gph 12-volt
$91.59
ATT4511-7
S1100 is our most powerful and efficient automatic pump. High capacity for larger boats and yachts. 1100 GPH at open flow, 973 GPH at 3.3' head. 1-1/8" hose outlet.
|
ATTWOOD 24" Hand-Operated Bilge Pump
$19.95
ATT11590-5
Six strokes pump out one gallon of water. Non-corrosive ABS plastic pump with flexible polyethylene hose. Bottom cap is removable for easy cleaning. 24" LENGTH.
|
ATTWOOD HEAVY DUTY BILGE PUMP-1700GPH
$88.95
ATT4030-4
All Heavy-Duty Bilge Pumps include a 36" length of 16-gauge caulked and tinned copper wire. The amp draw listed in the chart below is rated at open flow and design voltage. The perfect upgrade from 1500 GPH rated pumps…especially older, over-rated designs. Easily and affordably replaces 2000 GPH rated pumps. Delivers true 1700 GPH at open flow while drawing less than 7 amps. Note: Attwood bilge pumps must be immersed in water for priming.
|
ATTWOOD HEAVY DUTY BILGE PUMP-2000GPH
$102.49
ATT4060-4
All Heavy-Duty Bilge Pumps include a 36" length of 16-gauge caulked and tinned copper wire. The amp draw listed in the chart below is rated at open flow and design voltage. Attwood's highest capacity bilge pump! Ball-bearing design provides for cooler motor operation and longer life. Delivers more than 2000 GPH at open flow while drawing fewer than 10 amps. Note: Attwood bilge pumps must be immersed in water for priming.
|
ATTWOOD V500 BILGE PUMP
$18.69
ATT4204-7
The most popular bilge pump on the market. Our most compact pump, now modified to deliver more than 500 GPH at open flow and 350 GPH at a 3.3 ft. head while drawing only 1.4 amps - the lowest in the industry.
Efficient - delivers at least 30 percent more flow per amp (GPH/amp) then competitive size pumps.
|
ATWOOD V625
$25.59
ATT4206-7
The perfect upgrade from 500 GPH pumps. Easily and affordably replaces higher rated pumps. Delivers more than 650 GPH at open flow and 425 GPH at a 3.3 ft. head while drawing only 1 amp.
Efficient - provides 70 percent more flow per amp (GPH/amp) than competitive 500 GPH pumps.
|
ATTWOOD V900 BILG PUMP
$34.85
ATT4209-7
An excellent choice as a stand-alone pump or as a back-up pump for small compartments on larger boats and yachts. Compact pump with a 1-1/8" diameter outlet delivers true 900 GPH at open flow and 700 GPH at a 3.3 ft. head while drawing only 3 amps.
Efficient - delivers up to 40 percent more flow per amp (GPH/amp) compared to some larger 1000 GPH pumps.
|
ATTWOOD V1250 BILGE PUMP
$38.89
ATT4212-7
Great value - rated "Best Buy" by independent consumer publications. Delivers true 1250 GPH at open flow. High capacity for boats that require a higher output pump. 1-1/8" diameter hose outlet. 950 GPH at a 3.3 ft. head while drawing less than 3 amps. Available in 12-volt and 24-volt models.
Efficient - provides 40% to 60% more flow per amp (GPH/amp) than competitive 1000+ GPH pumps.
|
ATT4670-7 ATTWOOD 780GPH LIVEWELL PUMP SHORT THREADS
$36.55
ATT4670-7
These fantastic 780gph aerator pumps with efficient water output capacities, features a cartridge design for convenience, plus the cartridges are interchangeable. Also features an improved motor for long life.The unique second outlet makes it possible to feed another livewell or a washdown outlet.Att4670-7 has a short 3/4" thread for adapting directly to a 3/4"thru hull.The outlet will accept 3/4" hose for your washdown or livewell.3 YEAR WARRANTEE
|
ATT4672-7 ATTWOOD 780GPH LIVEWEEL PUMP-LONG THREADS
$36.59
ATT4672-7
These fantastic 780gph aerator pumps with efficient water output capacities, features a cartridge design for convenience, plus the cartridges are interchangeable. Also features an improved motor for long life.The unique second outlet makes it possible to feed another livewell or a washdown outlet.Att4672-7 has a long 3/4" thread for thru hull application. The outlet will accept 3/4" hose for your washdown or livewell.3 YEAR WARRANTEE
|
ATTWOOD V-500 Baitwell II Aerator Kit
$43.49
ATT4256-7
The V-500 Baitwell II Kit converts any container into a portable baitwell tank. The Baitwell II can be powered by either alkaline D-Cell batteries, lantern batteries, or 12-volt car or motorcycle batteries. Clips attach to a 12-volt battery to provide power. Tubes can be cut to a shorter length if necessary.
Kit Includes:
V-Series V500 bilge pump with short inlet
Suction cups for bottom of pump
Open cell filter
90° elbow at pump outlet
3/4" dia. tube, 11" length, with integral spray head
Two battery clips
Cordura-type battery pouch
Battery tray for D-Cell batteries
|
ATTWOOD Float Switch with Cover
$24.95
ATT4201-7
The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pump output like some reed switch designs. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent Toxic Substance" listed as a health hazard in more than 26 states.
|
ATTWOOD FLOAT SWITCH
$22.85
ATT4202-7
The Automatic Float Switch converts any bilge pump that draws 12 amps (at 12 VDC) or 6 amps (at 24 VDC) or less to fully automatic operation. It features a compact, low-profile design that mounts on any surface from horizontal up to a 24° angle. No large voltage drop which reduces bilge pump output like some reed switch designs. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume ignition and electrical shock. Contains no mercury, a "Persistent Toxic Substance," listed as a health hazard in more than 26 states.
|
ATTWOOD Replacement Strainer
$5.89
ATT3885-3
Durable strainers to prevent debris from clogging baitwell drains and aerator pumps. Acetal plastic. Caution: Aerator pump must be secured with aerator attachment nut prior to installing strainer. Fits Aerator Inlet and 3886-1 Thru-Hull. THREAD plastic 3/4"-14 NPSM.
|
