|
|
JABSCO (ITT) Bilge Pumps & Shower Sump Pumps
|
37202-2012 JABSCO BILGE or SHOWER DRAIN PUMP
$169.95
ITT37202-2012
Pump Bilge/Shower Drain CE 12 Volt dc model, fuse 10 amp
200 gph (780 lph) open flow output.
3.4 gpm (13 lpm) open flow output at 3ft (1m) head.
Self-priming up to 6ft (2m) vertical lift allows mounting above wet bilges.
Diaphragm design allows extended dry running.
Quiet running.
Complete with Pumpgard strainer.
Corrosion resistant materials throughout.
Oil resistant elastimers.
|
31610-0092 JABSCO "PAR MAX 3" SHOWER DRAIN PUMP
$139.95
ITT31610-0092
3.5 gpm (13.2 lpm) open flow output. Self-priming up to 10ft (3m). Four piston diaphragm sealed for smooth and quiet operation. Thermal overload protection automatically stops motor should it overheat due to overload, with auto re-start feature. Diaphragm design allows extended dry running. Pressure switch cut-in 15 psi (1.0 bar), cut-out 25 psi (1.7 bar), low pressure, or cut-in 20 psi (1.4 bar) cut-out 40 psi (2.8 bar), high pressure. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
|
31705-0092 JABSCO PAR-MAX 4 BILGE or LIVEWELL PUMP
$164.29
ITT31705-0092
FLOW 3.8 GPM, "PUMPGUARD" STRAINER, SNAP IN PORT FITTINGS, ULTRA QUIET OPERATION, THERMAL OVERLOAD PROTECTION, LOW PROFILE DESIGN, EASY INSTALLATION.
|
36960-2000 JABSCO BILGE or SHOWER SUMP
$249.95
ITT36960-2000
FLOW 4 - 4.5 GPM, The inexpensive 37202 and 36960 series include many of the dependable features of the classic Jabsco “PAR” pumps displayed above. They are ideally suited for bilge or shower sump installations and come complete with a 3/4” suction strainer. They will prime up to 6 feet and will run dry without damage.
|
JABSCO BILGE IN-LINE STRAINER
$19.95
ITT36200-0000
3/4" HOSE,VISIBLE SCREEN, EASY TO CLEAN, THREADED BOWL, KEEPS ACCUMULATION OUT OF PUMP AND LINES.
|
JABSCO Strainer Barb Pump
$21.95
ITT36400-0000
1/2" HOSE. VISIBLE SCREEN, EASY TO CLEAN, THREADED BOWL, KEEPS ACCUMULATION OUT OF PUMP AND LINES.
|
JABSCO Strainer Pumpgard In-line
$21.95
ITT36400-1000
VISIBLE SCREEN, EASY TO CLEAN, THREADED BOWL, KEEPS ACCUMULATION OUT OF PUMP AND LINES.
|
JABSCO Strainer Pumpgard In-Line
$18.95
ITT36400-2000
VISIBLE SCREEN, EASY TO CLEAN, THREADED BOWL, KEEPS ACCUMULATION OUT OF PUMP AND LINES.
|
JABSCO BILGE PUMPGUARD IN-LINE STRAINER
$13.95
ITT46200-0000
MODEL FOR 3/4" (19mm) ID HOSE. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Quick, in-place, cleaning of the 40 mesh stainless steel screen.
|
JABSCO Pumpguard In-line Strainer
$13.95
ITT46400-0002
Kit Pumpguard In-line 1/2"HB (13mm) SS ID hose. Prevents unnecessary pump breakdowns caused by particles in the water.
Transparent housing allows instant inspection.
Quick, in-place, cleaning of the 40 mesh stainless steel screen.
|
JABSCO Pumpguard Plug-In Strainer
$13.95
ITT46400-0010
Kit Pumpguard Plug-In (19mm) ID hose x Plug-in 40 mesh SS 90 degree. Prevents unnecessary pump breakdowns caused by particles in the water.
Transparent housing allows instant inspection.
Quick, in-place, cleaning of the 40 mesh stainless steel screen.
|
JABSCO Pumpguard Plug-In Strainer
$13.95
ITT46400-0014
Kit Pumpguard Plug-In 1/2" Qest, 14 pipe inlet 90 degree and direct plug into PAR-Max inlet port. Prevents unnecessary pump breakdowns caused by particles in the water.
Transparent housing allows instant inspection.
Quick, in-place, cleaning of the 40 mesh stainless steel screen.
|
Marineengineparts.com & Partman.com are wholly owned subsidiaries of Lighthouse Marine Supply & Lighthouse Marine Distributors, Inc
Partman & Partman.com are both registered trademarks of lighthouse Marine Distributors, Inc., Not responsible for typographical errors. Some merchandise may be limited in supply or available only by special order. Pictures are for illustrations purposes only, Prices are subject to change without notice.
29 Edgar Avenue - Riverhead, NY 11901 - toll free: 800-382-9335 - p: 631-722-5700 - fax: 631-722-5719 or Email: sales@partman.com
|
