 Fuel System Components |
MARINE CARBURETORS AND ACCESSORIES (Mercruiser, Crusader, OMC, Volvo-Penta, Pleasurecraft, Indmar and Chrysler Inboards)
|
|
||
9-34000 CARBURETOR ROCHESTER RE-MAN/2 BBL MERCRUISER 120HPMAL9-34000 MALLORY 9-34000 CARBURETOR ROCHESTER RE-MAN 2-BBL MERCRUISER 120HP, Factory Re-Manufactured Rochester Carburetors Are Completely Disassembled and Every Part Has Been Inspected And Cleaned Prior To Re-assembly. The 18-7609 two barrel will replace MERC # 1347-818619 & 1351-7354 & 1351-818619, also replaces Sierra # 18-7609 & 18-7609-1. |
||
18-7610-1 CARBURETOR ROCHESTER RE-MAN 2-BBL
18-7610-1 18-7610-1 CARBURETOR ROCHESTER RE-MAN 2-BBL, Factory Re-Manufactured Rochester Carburetors Are Completely Disassembled and Every Part Has Been Inspected And Cleaned Prior To Re-assembly. The 18-7610-1 will replace MERC # 1348-818621 & 1351-8480, direct replacement for the 2.5 & 3.0-L GM based Mercruiser engines with ROCHESTER CARBURETOR. MALLORY 9-34002. |
||
3310-807504A1 MERCRUISER "MERC-CARB" CARBURETOR3310807504A1 Mercruiser part # 3310-807504A1 MERCRUISER "MERC-CARB" CARBURETOR, (Single idle air adjustment screw), FITS MCM 3.0L/LX. (Note additional $25.00 core charge). |
||
9-34003 CARBURETOR ROCHESTER RE-MAN 2-BBL MERCRUISERMAL9-34003 MALLORY 9-34003 CARBURETOR ROCHESTER RE-MAN 2-BBL MERCRUISER, Replacement for the Mercruiser Models 188 and 888 Ford 302 cu.in. engines from 1971-1978. Re-Manufactured Rochester 2-bbl Carburetors Are Completely Disassembled and Every Part Has Been Inspected And Cleaned Prior To Re-assembly. Replace Mercruiser #'s 1347-818622 & 1376-5659A1, and Sierra part #'s 18-7603, 18-7603-1. |
||
9-34004 ROCHESTER Q-JET Remanufactured 4-BBL Carburetor 650-CFMMAL9-34004 Mallory Marine 9-34004 ROCHESTER Q-JET Remanufactured 4-BBL Carburetor 650-CFM, Restore Your Confidence In Your Engine Start-Ups and Performance. Used On Small Blocks, GM (Chevy) 305 & 350 Cu. In., (5.0 & 5.7-Liter Engines), Replaces Sierra #18-7615 & 18-7615-1, If Needed Order Flame Arrestor Part# 18-7231 And Rebuild Kit # 18-7095. Note: Crusader applications order part number: 18-7607-1 (1782403) see below on this page. NOTE: Some OMC engine applications may require throttle arm modification. |
||
9-34005 ROCHESTER Q-JET Remanufactured 4-BBL Carburetor 750-CFMMAL9-34005 Mallory Marine 9-34005 Remanufactured 4-BBL Carburetor 750-CFM, Used on most Big Block GM (Chevy) 454 Cu.In. (7.4-Liter) engines. Will replace Mercruiser # 1347-8288A1, 1347-8291A3 and Rochester #'s 17057287, 17059290, 1708563, 17080560, 17059287. Also replaces Sierra part #'s 18-7616 & 18-7616-1. Note: Crusader applications order part number: 18-7607-1 (1782403) see below on this page. |
||
|
||
EDELBROCK 1409 CARBURETOR 600-CFMEDL1409 EDELBROCK 1409 CARBURETOR 600-CFM (NEW), This will replace the Q-Jet and Holley carburetors, some additional parts may be required. This is a new factory carb, 600-CFM and can be used on the Chrysler LM318/360 along with GM small block engines (5.0 and 5.7-Liter). Also can be used to replace Weber carburetors used on some mercruiser engine applications. If needed, order a new flame arrester # 18-7230. NOTE: ALL NEW EDELBROCK CARBURETORS ARE COVERED BY A 90-DAY MANUFACTURERS LIMITED WARRANTY. When needed, order carburetor repair kit # EDL1477. |
||
|
EDELBROCK 1410 CARBURETOR 750-CFM EDL1410 EDELBROCK 1410 CARBURETOR 750-CFM (NEW), This will replace the Q-Jet and Holley carburetors, some additional parts may be required, This new factory carburetor is 750-CFM and can be used on the Chrysler 440 and also GM BIG block engines 454 cu.in. (7.4-Liter). Also can be used to replace Weber carburetors used on some mercruiser engine applications. NOTE: ALL NEW EDELBROCK CARBURETORS ARE COVERED BY A 90-DAY MANUFACTURERS LIMITED WARRANTY. When needed order carburetor repair kit # EDL1477. |
||
EDELBROCK 1477 CARBURETOR REPAIR KITEDL1477 EDELBROCK 1477 CARBURETOR REPAIR KIT FOR BOTH EDELBROCK MODEL'S 1409 AND 1410, WILL ALSO REBUILD WEBER AND SOME CARTER 4-BBL CARBS. |
||
HOLLEY 0-80320-1 Carburetor "NEW" 2-BBL 300-CFMMAL9-34063 HOLLEY 0-80320-1 Carburetor "NEW" 2-BBL 300-CFM. Fits Ford Marine 302 CID (5.0-Liter, V-8) engines. Model 2300, Electric choke, 30cc accelerator pump, Single fuel inlet, 5" airhorn. Renew Kit # HLY703-30. Mallory # MAL9-34063. |
||
HOLLEY 0-80402-1 Carburetor "NEW" 2-BBL 500-CFM MAL9-34052 HOLLEY 0-80402-1 Carburetor "NEW" 2-BBL 500-CFM. Model 2300, Universal marine calibration, "J"-style vent tubes, Electric choke, Single fuel inlet, 30cc accelerator pump, 5" Airhorn. Renew Kit # HLY703-30. |
||
HOLLEY 0-80552 Carburetor "NEW" 4-BBL 650-CFM MAL9-34057 HOLLEY 0-80552 Carburetor "NEW" 4-BBL, 650-CFM, Replacement for Rochester Quadrajet (Spred Bore mounting pattern) GM (Chevy) 5.0-Liter and 5.7-Liter engines, Model 4175, electric choke, single fuel inlet, 5" air horn. ***NOTE: carburetor is slightly longer than orginal Rochester.***. Uses all spread bore accessories. If needed order flame arrestor #18-7232 uses rebuild kit# HLY9-37634. |
||
HOLLEY 0-80559 Carburetor "NEW" 4-BBL 600-CFM MAL9-34058 HOLLEY 0-80559 Carburetor "NEW" 4-BBL 600-CFM. Model 4150, mechanical secondaries. electric choke, 30 cc accelerator pump, duel fuel inlets, & 5" airhorn. |
||
HOLLEY 0-80319-1 Carburetor "NEW" 4-BBL 600-CFM MAL9-34062 HOLLEY 0-80319-1 Carburetor "NEW" 4-BBL 600-CFM, Model 4160, vacuum secondaries, electric choke, 30 cc accelerator pump, single fuel inlet, & 5" airhorn. |
||
HOLLEY 0-80318-1 Carburetor "NEW" 4-BBL 600-CFMHLY0-80318-1 HOLLEY 0-80318-1 Carburetor "NEW" 4-BBL 600-CFM, Fits FORD Marine 460 CID (7.5-Liter, V-8). Model 4160, Vacuum secondaries, Electric choke, 30cc accelerator pump, Single fuel inlet, 5" Airhorn. Renew Kit HLY703-33. Mallory # MAL9-34061. |
||
HOLLEY 0-80364 Carburetor "NEW" 4-BBL 450-CFMMAL9-34051 HOLLEY 0-80364 Carburetor "NEW" 4-BBL 450-CFM, Fits Ford Marine 302 CID (5.0-Liter V-8) engines. Model 4160, Vacuum secondaries, Electric choke, 30cc accelerator pump, Single fuel inlet, 5" Airhorn. Renew Kit # HLY703-28. |
||
HOLLEY 0-80551 Carburetor "NEW" 4-BBL 600-CFMHLY0-80551 HOLLEY 0-80551 Carburetor "NEW" 4-BBL 600-CFM, Model 4160, Universal marine calibration, Vacuum secondaries, "J"- style vent tubes, Electric choke, Single fuel inlet, 30cc accelerator pump, 5" Airhorn. Mallory part # MAL9-34056. Renew Kit #HLY703-1. |
||
Holley 0-80492-1 Carburetor "NEW" 4-BBL 600-CFM MAL9-34054 Holley 0-80492-1 Carburetor "NEW" 4-BBL 600-CFM, Replacement Carburetor for OMC & Volvo-Penta 4.3- Liter V-6. Model 4160, Vacuum secondaries, Automatic electric choke, 30cc accelerator pump, Single fuel inlet, 5" Airhorn. Renew Kit HLY703-29. |
||
HOLLEY 0-9015-1 CARBURETOR "NEW" 4-BBL 750-CFMMAL9-34059 HOLLEY 0-9015-1 CARBURETOR 4-BBL, 750-CFM, with electric choke. Model 4160, dual fuel feed inlets, Universal marine calibration, Vacuum secondaries, electric choke, "J" style vent tubes, 30cc Accelerator pump and 5" airhorn. OPTIONAL Items: Renew Kit # HLY3-720, Chrome Fuel Line # HLY734-5. |
||
FLAME ARRESTER 5"-4BBL-2 FITTINGS$82.95 18-7231 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses.18-7231 has a 5.050"throat for 4bbl carburetors and has 2 breather fittings. |
||
FLAME ARRESTER 5"-4BBL-1 FITTING$82.95 18-7230 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses.18-7230 has a 5.050"throat for 4bbl carburetors and one breather fitting. |
||
FLAME ARRESTER 3"-2BBL-1FITTING$82.95 18-7228 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses.18-7228 has a 3.120" opening for 2bbl carburetors and one breather fitting. |
||
FLAME ARRESTER 5"-4BBL-NO FITTING $82.95 18-7229 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses.18-7229 has a 5.050"throat for 4bbl carburetors and no breather fitting. |
||
FLAME ARRESTER 5"-4BBL -2 FITTINGS HI-PERF.$82.95 18-7232 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses.18-7232 has a 5.050"throat for 4bbl carburetors and 2 breather fittings. 18-7232 is 3" tall, so is great where maximum air intake is required. |
||
FLAME ARRESTER 5" 4BBL CHRYSLER TALL TYPE $91.39 3745648 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses.3745648 has a 5.0" throat and is 3" high for 4bbl carburetors they have one fitting for the breather hose and a small fitting for the fuel pump return. This flame arrester is a direct replacment for Chrysler Marine engines. |
||
FLAME ARRESTER 5"4BBL CHRYSLER SHORT TYPE$89.49 3745649 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses.3745649 has a 5."throat and is 2" high for 4bbl carburetors and one fitting for the breather hose and one small fitting for the fuel pump return. This is a direct Chrysler Marine replacement. |
||
FLAME ARRESTER 4 1/4"THROAT 2 1/4" TALL$65.49 CAO-10-59 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses. CAO-10-59 has a 4 1/4" throat and is 2 1/4" high. |
||
FLAME ARRESTER 5" THROAT 2 1/4" TALLOR-10-66 Coast Guard Approved Flame Arresters Are Required to insure that no backfires create an unsafe condition in your engine compartment. Flame arresters are made for 2bbl and 4bbl carburetors with and without hose fittings for the breather hoses. OR-10-66 has a 5" throat and is 2 1/4" high. This will fit your standard 4bbl carburetor. |
||
33240 Choke Spring Assembly Kit for GM (Chevy) Small BlockBJM33240 33240 Choke Spring Assembly Kit for GM (Chevy) Small Block Engines. Kit complete with retainer clip and mounting screw. Use with Rochester Carburetors. |
||
30233 Choke Spring Assembly Kit GM (Chevy) Big BlockBJM30233 30233 Choke Spring Assembly Kit for GM (Chevy) Big Block Engines. Kit complete with retainer clip and mounting screw. Use with Rochester Carburetors. |
||
70125A1 Mercruiser Electric ChokeBJM70125A1 70125A1 Mercruiser Electric Choke Replacement. NOTE: Part number may also be known as: 710-70125A 1, MERC-70125A1 and 710-70125A1. |
||
HOLLEY 45-258 Electric Choke Cap HLY45-258 HOLLEY 45-258 Replacement Electric Choke Cap and Insulator for Holley Carburetor Models 2300, 4150, 4160, 4010 and 4011. |
||
Edelbrock 1474 Electric Choke Cap Kit$30.95 EDL1474 Edelbrock 1474 Electric Choke Cap Kit. Edelbrock 1474 choke cap kits is designed to rebuild your electric choke cap. It includes a choke cap, a gasket for the cap, 3- screws, and 3-locking tabs. |
||
Universal Fuel Line$64.95 BJM3838 Universal fuel line with 3/8" Inverted flare fittings, average length 30". |
||
Universal Fuel Line$64.95 BJM3838-90 Universal Fuel line with one 3/8" Inverted flare fitting and one 3/8" 90 degree inverted flare fitting. Average length 30". |
||
Universal Fuel Line$64.95 BJM38516 Universal Fuel line with 3/8" Inverted flare fittings on one end and a 5/16" inverted flare fitting on the other end. Average length 30". |
||
Universal Fuel Line$64.95 BJM38516-90 Universal Fuel Line with one 5/16" 90 Degree Inverted flare fitting and one 3/8" inverted flare fitting. Average length 30". |
||
Crusader 97122 Carburetor Wedge 8-Degree$14.06 CRU97122 Crusader 97122 Carburetor Wedge, 8-Degree, Commonly found on Crusader engines with Rochester Quadrajet 4-bbl carburetor (spread bore). Heavy duty composite for strength and durability. 8-degree wedge will help level out your carburetor. Requires (2) # 18-0462 mounting gaskets. |
||
Wedge Plate (aluminum) 7°, square bore $169.95 HLY717-1 7° wedge with square bore flange allows carburetor to sit level on tilted engine installations. Includes gaskets, studs and nuts. (Note:will not fit Rochester carburetors) |
||
Wedge Plate (aluminum) 12°, square bore $167.95 HLY717-2 12° Wedge with square bore flange allows carburetor to sit level on tilted engine installations. Includes gaskets, studs and nuts. (Note:will not fit Rochester Carburetors) |
||
717-7 Mercruiser Linkage KitHLY717-7 Use this kit to facilitate installation and hook-up of a Holley marine carburetor, Mercruiser installation, when using one of the Holley throttle bracket kits (bracket, throttle cable). |
||
717-5 Throttle Cable BracketHLY717-5 Designed for Holley Model 4010, square bore carburetors. This throttle bracket kit allows for simple hook-up of the throttle cable from the helm and comes complete with gaskets, studs and nuts. For Holley and Edelbrock carburators. will not fit Rochester Carburetors. |
||
Throttle Cable Bracket$73.49 HLY717-6 Designed for Holley Model 4011, spread bore carburetors. This throttle bracket kit allows for simple hook-up of the throttle cable from the helm and comes complete with gaskets, studs and nuts. will fit Rochester carburetor bolt pattern. |
||
Carburetor Adatptor Plate$54.95 HLY17-43 ADAPTS A HOLLEY 2 BARREL TO A ROCHESTER 2 BARREL INTAKE MANIFOLD. |
||
Edelbrock 2696 Carburetor Adaptor PlateEDL2696 Edelbrock 2696 Carburetor Adaptor Plate, Adapts square bore carburetors to rochester spread bore intake manifolds. Use to adapt the Edelbrock 1409 and 1410 Carburetors to ROCHESTER "SPREAD BORE" INTAKE MANIFOLD. |
||
MALLORY 9-37639 KIT WEBER 4BBL CARBURETORMAL9-37639 MALLORY 9-37639 KIT WEBER 4BBL CARBURETOR, Replaces Mercruiser # 809064 and Sierra # 18-7748. |
||
MALLORY 9-37640 KIT WEBER 4BBL CARBURETOR$59.95 MAL9-37640 MALLORY 9-37640 KIT WEBER 4BBL CARBURETOR, Replaces Mercruiser part # 809065, Sierra # 18-7749 and Volvo-Penta # 835076. |
||
FEL-PRO CARB MOUNTING GASKET-HOLLEY-4BBL OPENFEL17840 CARB MOUNTING GASKET FOR HOLLEY,CARTER AFB,SQUARE BORE OPEN PLENUM WITH THE 4-BOLT PATTERN, EITHER 4 1/4"X5 5/8" OR 5 5/32"X5 5/8". THICKNESS 1/16". |
||
FEL-PRO CARB MOUNTING GASKET-HOLLEY-4BBL-4HOLEFEL17841 CARB MOUNTING GASKET FOR HOLLEY,CARTER AFB,SQUARE BORE W/(4)1 3/4" DIAMETER HOLE WITH THE 4-BOLT PATTERN, EITHER 4 1/4"X5 5/8" OR 5 5/32"X5 5/8". THICKNESS 1/16". |
||
CARB MOUNTING GASKET-Q-JET-OPEN$2.29 18-2848 CARB MOUNTING GASKET FOR ROCHESTER SPREAD BORE W/(OPEN PLENUM. THE 4-BOLT PATTERN, 4 1/4"X5 5/8" THICKNESS 1/16". |
||
Sierra, 18-0462 Carburator Gasket$6.49 18-0462 Sierra, 18-0462 Carburator Gasket. Replaces 27-48399. |
||
Sierra, 18-0994 Carbureator Mounting Gasket$2.94 18-0994 Sierra, 18-0994 Carbureator Mounting Gasket. Replaces 27-70143-1. |
||
Sierra 18-0356 Carburetor Mounting Gasket$1.99 18-0356 Sierra 18-0356 Carburetor Mounting Gasket. For A 2-BBL Rochester. Replaces 27-64692. |
||
Sierra, 18-0360 Carburetor Mounting Gasket$2.99 18-0360 Sierra, 18-0360 Carburetor Mounting Gasket. Replaces 27-70142. |
local: (631)-722-5700
Partman & Partman.com are both registered trademarks of lighthouse Marine Distributors, Inc., Not responsible for typographical errors. Some merchandise may be limited in supply or available only by special order. Pictures are for illustrations purposes only, Prices are subject to change without notice.
29 Edgar Avenue - Riverhead, NY 11901 - toll free: 800-382-9335 - p: 631-722-5700 - fax: 631-722-5719 or Email: sales@partman.com