|
|
18-2619-1 Outdrive Mounting Gasket Kit
$6.50 $5.95 On Sale!
18-2619-1
Replaces Mercruiser part#27-64818A3. Fits All Alpha-1
(1983 and newer) and Alpha-1, GEN-II with internal gear lube monitor.
|
18-2747 U-Joint Bellows - GEN-II
$59.95
18-2747
Replaces Mercruiser part #816431A1.
|
18-2753-2 Shift Cable Bellows
$15.95
18-2753-2
Replaces Mercruiser part#74639. Fits all #1/1R/MR/Alpha and Bravo units. Supplied with "crush" clamp and stainless hose clamp.
|
18-2750 Exhaust Bellows - Double Clamp
$22.95
18-2750
Replaces Mercruiser part#32734A3 & 18654A1. Fits all Mercruiser applications, (Alpha, TRS and Bravo).
Has "clamp" on both ends.
|
Sierra 18-2760 Exhaust Tube
$31.95
18-2760
Sierra 18-2760 Exhaust Tube, Replacement for Mercruiser Inboard/Outboard #78458A1, Includes clamp, For Bravo I, II, III
|
18-3602 Water Intake Hose (3/4"-ID)
$9.49
18-3602
Replaces: 32-41725-33, 13-7/8" Length - 3/4" I.D., For: MR, Alpha I, Gen II
|
Sierra 18-2100 Gimball Bearing
$49.95 $39.95 On Sale!
18-2100
Sierra 18-2100 Gimball Bearing, Replaces Mercruiser part #30-60794A4. Fits Mercruiser #1/MR/Alpha from 1974 to 1997. Replaces OMC part # 983937 AND 3853807, Fits OMC Cobra and Volvo-Penta SX sterndrives.
|
Sierra 18-21005 GIMBAL BEARING
$59.95
18-21005
Sierra 18-21005 GIMBAL BEARING, Replaces 30-862540A3, fits ALL BRAVOS, Alpha One Gen II 1998 & up.
|
18-8206 Transom Reseal Kit
$149.95
18-8206
For: Alpha 1 Gen II, All bellows (exhaust,gimbal and shift), Gimbal Bearing, water hose, outdrive mounting gaskets and o'rings.
|
18-9031 Bellows Adhesive
$9.45
18-9031
Replaces Mercruiser part#92-86166. Note: Apply bellows adhesive to bellows, let "DRY" to touch and then install bellows.
|
18-2190 Alpha Shift Cable - (Intermidiate Housing
$53.95
18-2190
Replaces Mercruiser part #19543A4 and 865436A02. Fits Mercruiser #1 drives s/n #6225577 & up. For "Aft" installation into "bell" housing. For use in applications using core wire with armored strand construction. (No support tube) 63" conduit with hardware package.
|
865436A02 LOWER SHIFT CABLE (OEM)
$72.39
865436A02
Aft Entry Lower shift cable for all Alpha's and Alpha 1, GEN-II. Original Equipment Mercruiser Shift Cable.
|
12-35935 Washer for Out Drive Mounting Stud
$1.18
1235935
Washer for Out Drive Mounting Stud.
|
11-134391 Lock Nut for Out Drive Mounting Stud
$3.13
BJM11134391
Lock Nut for Out Drive Mounting Stud.
|
805320A03 Trim Limit and Trim Sender Kit
$105.95 $89.95 On Sale!
805320A03
Trim limit and trim sender kit for all Alpha and Bravo units. Original Mercruiser Equipment.
|
18-2116 Trim Line "Short" (Port and Starboard) 32-99904
$27.95
18-2116
Replaces Mercruiser part#32-99904. Fits Alpha cylinder #14035A3, 14034A3, 98704A3 & 98703A2 and Bravo cylinder #'s 98704a17 & 98703A26. These are the trim lines closest to the boat on the front of the cylinders. Short and used on both port and starboard sides.
|
18-2423 Power Trim Cylinder (Starboard) 815954A7
$329.95
18-2423
Replaces: Mercruiser part # 815954A7, For: Alpha 1, GEN-II (Starboard), (S/N F680000 - UP), starboard side.
|
18-2114 Trim Line (Starboard) 32-99902-1
$34.95
18-2114
Replaces Mercruiser part#32-99902-1. (Starboard), Fits Alpha trim cylinder casting #14034.
|
18-2422 Power Trim Cylinder (Port) 815935A7
$329.95
18-2422
Replaces: Replaces Mercruiser part # 815935A7, For:Alpha-1, GEN-II, (Port Side), (S/N F680000 - UP).
|
18-2115 Trim Line (Port) 32-99903-1
$34.95
18-2115
Replaces Mercruiser part#32-99903-1. (Port side), Fits Alpha trim cylinder with casting #14035.
|
98825A4 Hydraulic Trim Line Connector Assembly
$73.64
98825A4
Hydraulic Trim Line Connector Assembly.
|
18-2161 Shift Arm with Roller
$23.49 $21.15 On Sale!
18-2161
Sierra Shift Arm with Roller, Mercruiser Bell Housing, replaces mercruiser part # 45518A2.
|
18-2170 Shift Arm Screw
$1.99
18-2170
Shift Arm Screw for the shift arm 18-2161. Replaces mercruiser part # 10-45590.
|
18-2622 Bell Housing Bushing (update) Kit
$29.69
18-2622
Bell Housing Shift Shaft Seal and Bushing Kit, Replaces Mercruiser part # #23-805041A2. Updates older Mercruiser #1, R, MR, Alpha-I to "new"
shift shaft seal. Standard on "Early" Mercuiser Alpha-I, Generation-II up to serial number OF094774. Helps to Keep the water out of Unviversal Joint Bellows and Shift Cable.
|
12-39116 Nylon Washer for Shift Arm Assembly
$1.09
1239116
Nylon Washer for Shift Arm Assembly.
|
816685 SHIFT SHAFT
$49.95
816685
SHIFT SHAFT ALPHA-1, GENERATION II, IN BELL HOUSING, REPLACES SIERRA PART # 18-3749.
|
23-806036A1 BELL HOUSING SHIFT SHAFT SEAL KIT
$14.99
18-3760
BELL HOUSING SHIFT SHAFT SEAL AND BUSHING KIT FOR MERCRUISER ALPHA-I, GENERATION-II FROM SERIAL NUMBER OF680000 AND NEWER, REPLACES MERCRUISER PART # 23-806036A1.
|
