Bennett Trim Tabs & Accessories
|
Bennett 129E Trim Tab Kit- 12" x 9"
 BEN129E Bennett 129E Trim Tab Kit- 12" x 9", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 15' to 19' with Single I/O, Single Outboard or Inboard. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 189E Trim Tab Kit- 18" x 9"
BEN189E Bennett 189E Trim Tab Kit- 18" x 9", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 19' to 24', with Single I/O, Single Outboard, or Inboard. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 1212E Trim Tab Kit- 12" x 12"
BEN1212E Bennett 1212E Trim Tab Kit- 12" x 12", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 19' to 24' with Limited Transom Space or When Extra Lift is needed. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 1812E Trim Tab Kit- 18" x 12"
BEN1812E Bennett 1812E Trim Tab Kit- 18" x 12", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 22' to 27' with Twin I/O or Twin Outboards. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 249E Trim Tab Kit- 24" x 9"
BEN249E Bennett 249E Trim Tab Kit- 24" x 9", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 22' to 27' Single I/O or Single Outboard. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 309E Trim Tab Kit- 30" x 9"
BEN309E Bennett 309E Trim Tab Kit- 30" x 9", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 25' to 30', with Single I/O or Outboard. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 369E Trim Tab Kit- 36" x 9"
BEN369E Bennett 369E Trim Tab Kit- 36" x 9", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 28' to 34', with Inboard engines. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 3612E Trim Tab Kit 36" x 12"
BEN3612E Bennett 3612E Trim Tab Kit- 36" x 12", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 28' to 34'. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
|
Bennett 429E Trim Tab Kit- 42" x 9"
BEN429E Bennett 429E Trim Tab Kit- 42" x 9", Complete Bennett Trim Tab Kit with "New" Waterproof Euro Style Rocker Switch Control. Recommended Boat Length 32' to 38', with Inboard engines. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
BENNETT M80 SPORT TABS 8" X 10" Trim Tab KitBENM80 BENNETT M80 SPORT TABS 8" X 10" Trim Tab Kit. Recommended Boat Length 17' to 20'. Bennett Small Sport Tabs are trim tab systems designed for boats with smaller transoms. Use small sport tabs to increase towing efficiency and planing ability on small trailer sized boats such as ski boats, bass boats and center consoles. Trim planes have a unique curved bat wing design which effectively increases lift by 30 percent. NOTE: limited inventory, only (1) set at this price. Kit includes: "New" Waterproof Euro Style Rocker Switch Control, (2) stainless steel trim tabs, (2) actuators, (1) hydraulic power unit (Five year warranty), wiring, tubing and hardware. |
||
Bennett ES2000 "EURO" Control Switch BENES2000SK Bennett Marine ES2000 "EURO" waterproof rocker control switch. This control is the "NEW" "Standard" replacement trim tab control switch for "ALL" Bennett Trim Tabs. This is also the switch supplied in "ALL" Bennett trim tab kits. This control is ergonomically designed, water resistant and provides a positive “click” when the trim tabs are engaged. Its lock-out feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett2-1/2" Rocker Switch hole. |
||
TPI2000 Bennett Marine Trim Tab Position Indicator BENTPI2000 Know The Position Of Your Trim Tabs! Bennett Tab Positon Indicator (TPI) accurately indicates the position of each trim tab adding precision and confidence to trim tab operation. Attractive, compact, water resistant and easy to install. The TPI helm display accurately shows deflection percentage of each trim tab, and the LED brightness is adjustable for any lighting condition. Works with all Bennett Trim Tabs. They are easily retrofitted to existing Bennett Trim Tabs, and can be adapted to Boat Leveler brand Instatrim systems. |
||
Bennett AC3000 Marine Auto Tab Control
BENAC3000 Get a Perfectly Trimmed Boat - Every Time! Bennett Marine pioneered the Auto Tab Control (ATC) to make the boater’s experience on the water even better. It does exactly what it says it does – interacting directly with your trim tab system to automatically monitor your boat’s position and maintain the perfect cruising attitude. Some of the major benefits are that it saves you money on fuel. A properly trimmed boat can significantly lower fuel costs in a single season of usage. Easy to install - just plug and play! Very few tools are needed for installation, and everything plugs right into the ATC Control Unit. No more guesswork - it trims the boat better than you can. Calculating more than a thousand attitude readings per second, the ATC adjusts your trim tabs to changes in vessel speed, sea conditions and shifting weight. The most comfortable ride you’ve ever had on your boat. Maintain the best cruising attitude without the need to work manual trim controls. |
||
EIC5000 BENNETT ELECTRONIC INDICATOR CONTROLBENEIC5000 EIC5000 BENNETT ELECTRONIC INDICATOR CONTROL, Three features combined into one sophisticated control — the popular Bennett rocker switch control, trim tab indicator and the Auto Tab Retractor. Water resistant, highly accurate and features variable intensity LEDs for night or day. Features a relay module mounted near the transom, which simplifies installation by reducing the number of wires to run to the helm. Standard kit for single station includes: EIC Display (EIC001), EIC Relay Module (EIC101), Sensor with 10’ SC Red and Connector (EIC901P), Sensor with 10’ SC Green and Connector (EIC901S), EIC Cable (EIC201), EIC Pigtail Pack (EIC401), EIC Hardware Pack (EIC501) |
||
Bennett A1101ASK Actuator Cylinder "Standard"
BENA1101ASK Bennett A1101ASK Actuator Cylinder "Standard" Replacement Trim Cylinder for BENNETT Marine Trim tabs. This is "STANDARD" CYLINDER (has 4 raised "rings" on body) and measures 13-3/4" overall length. Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator — thus eliminating external hoses subject to damage. *Please Click Above Link For More Info* |
||
Bennett A1200SSK Actuator Cyliner "SHORT"
BENA1200SSK Bennett A1200SSK Actuator Cylinder "SHORT" comes complete as shown with upper and lower hinges. NOTE this is "SHORT" cylinder FOR LIMITED SPECIAL APPLICATIONS, (has 3 raised "rings" on cylinder body and measures 11-3/4" overall lenght). PLEASE MAKE CERTAIN YOU HAVE THIS "SHORTER" CYLINDER (ACTUATOR) BEFORE ORDERING, AS IT IS NOT STANDARD AND IS ONLY USED IN LIMITED APPLICATIONS. *Click Above Link For More Info.* |
||
Bennett AR512 Auto Tab Retractor
BENAR512 The Bennett AR512 automatically retracts tabs when boat’s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them “full-up” during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily installed under the instrument panel, the ATR connects to the trim tab control and engine ignition switch. |
||
|
||
Bennett V351HPU1 Trim Pump Assembly 12-Volt
BENV351HPU1 Bennett V351HPU1 Trim Pump Assembly 12-Volt. A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electro-hydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance. Measures 4" x 7-1/2" x 5-1/2". Uses automatic transmission fluid. Pump and Motor assembly includes pump and motor, solenoid valves, reservoir, pump wiring and lexan cover. "Click" on photo to see parts included. Installs easily with optional BENH1179 mounting bracket. |
||
|
Bennett V351HPU2 Trim Pump Assembly 24-Volt
Bennett V351HPU2 Trim Pump Assembly 24-Volt. A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance. Measures 4" x 7-1/2" x 5-1/2". Uses automatic transmission fluid. Pump and Motor assembly includes pump and motor, solenoid valves, reservoir, pump wiring and lexan cover. "Click" on photo to see parts included. Installs easily with optional BENH1179 mounting bracket. |
||
BENNET TRIM PLANE KIT (NO TRIM PLANES) 12-VOLTBENV351HUC1E BENNET TRIM PLANE KIT (NO TRIM PLANES) 12-VOLT. Kit includes pump, standard actuators, hose, wiring, euro style rocker switch & all mounting hardware. Replaces all the parts except for the actual trim planes. **KIT DOES NOT INCLUDES TRIM PLANES**. |
||
|
||
Bennett A1113 Lower Hing for ActuatorBENA1113 Bennett A1113 ctuator Lower Hinge ****IF NEEDED ORDER "PIN" #BENA1115 SEPARATELY***** |
||
Bennett A1115 Pin for Upper & Lower Hinge on ActuatorBENA1115 Bennett A1115 Pin for Upper & Lower Hinge on Actuator. |
||
Bennett VP1135GSK Green Starboard SolenoidBENVP1135GSK Bennett VP1135GSK Green Starboard Solenoid. Solenoid valves direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. |
||
Bennett VP1135RSK Red Port SolenoidBENVP1135RSK Bennett VP1135RSK Red Port Solenoid. Solenoid valves direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. |
||
Bennett Hydraulic Tubing 20' LengthBENT1125 The Bennett T1125 Hydraulic Tubing is stronger, flexible, & impervious to corrosion. Tubing has a 1/4" outside diameter X 20'-Length. 1800-lb. burst pressure. Color is black. |
||
Bennett T1127 Nut with Ferrule Compression FittingBENT1127 Bennett T1127 Nut with Ferrule Compression Fittings. use for connecting hydraulic tubing to the power unit. provides a positive and secure connection. |
||
Bennett VP1138 Replacement Lexan CoverBENVP1138 Bennett VP1138 Lexan Cover protects electrohydraulic unit from occasional wash down. |
||
Bennett H1179 Standard Vertical Surface Mounting Bracket for V351HPU pump and motor BENH1179 Bennett H1179 Standard Vertical Surface Mounting Bracket for Bennett V351HPU pump and motor. |
||
Bennett WH1000 Wire Harness (PUMP TO CONTROL)BENWH1000 Bennett WH1000 wire harness dash control to trim pump wire harness (22'), with a female "IN" type connection. The wires are color coded for easy installation. (RED/GREEN/BLUE/YELLOW), RED: PORT SOLENOID VALVE, GREEN: STARBOARD SOLENOID VALVE, BLUE: MOTOR FORWARD(PUMP PRESSURE), YELLOW: MOTOR REVERSE(PUMP RETRACT). |
||
Bennet PT109 Pig Tail (FEMALE - WIRE HARNESS SIDE)BENPT109 Bennet PT109 Pig Tail (FEMALE - WIRE HARNESS SIDE) has female sockets in connector. The wires are color coded for easy installation.This is the female plug connector that attaches wire harness to the male pump plug. |
||
Bennet PT110 Pig Tail (MALE - MOTOR SIDE)BENPT110 Bennet PT110 Pig Tail (MALE - MOTOR CONNECTION SIDE) has MALE pins in connector. The wires are color coded for easy installation.This is the male prong connector that comes off trim pump motor. |
||
Bennett TPA129 12" x 9" Trim Plane Assembly (EACH)
BENTPA129 BENNETT 12" x 9" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA1212 12" x 12" Trim Plane Assembly (EACH)
BENTPA1212 BENNETT 12" x 12" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA189 18" x 9" Trim Plane Assembly (EACH)
BENTPA189 BENNETT 18" x 9" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA1812 18" x 12" Trim Plane Assembly (EACH)
BENTPA1812 BENNETT 18" x 12" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA249 24" x 9" Trim Plane Assembly (EACH)
BENTPA249 BENNETT 24" x 9" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA2412 24" x 12" Trim Plane Assembly (EACH)
BENTPA2412 BENNETT 24" x 12" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA309 30" x 9" Trim Plane Assembly (EACH)
BENTPA309 BENNETT 30" x 9" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA369 36" x 9" Trim Plane Assembly (EACH)
BENTPA369 BENNETT 36" x 9" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA3612 36" x 12" Trim Plane Assembly (EACH)
BENTPA3612 BENNETT 36" x 12" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
|
Bennett TPA3612 42" x 9" Trim Plane Assembly (EACH)
BENTPA429 BENNETT 42" x 9" TRIM PLANE ASSEMBLY (EACH), 12-gauge, 304 stainless steel, Every trim tab is sheared and bent, not welded. Welding alters the properties of stainless steel which invites corrosion. Includes trim plane, backing plate, & hinge plate **"click" photo for an enlarged image of the hinge** |
||
Bennett H1173 Tube bending Clip & SupportBENH1173 The Bennet H1173 Tube bending clip allows hydraulic tubing to bend at 90 degree angle - prevents kinks in the tubing. |
||
Bennett H1172 90º Elbow FittingBENH1172 Bennett H1172 90º Elbow Fitting used to connect the 3" x 1/8" male pipe thread fitting H1171-3 to the Hydraulic Power Unit. |
||
Bennett H1171-3 1/8" Male Pipe Thread Brass ConnectorBENH1171-3 Bennett H1171-3, 3" X 1/8" Male Pipe Thread Brass fitting to connect actuator to 90º elbow fitting. |
||
Bennett H1177 Nylon HangerBENH1177 Bennett H1177 Nylon Hanger is used to either hang wire or tubing for the bennett system. Making your enviorment not only look good but safe as well. |
||
BEZEL ONLY (OLDER) ROCKER SWITCHBENRS1003-RS REPLACEMENT "BEZEL" ONLY FOR OLDER STYLE "ROCKER SWITCH", {SCREW HEADS ARE VISIBLE LOOKING AT BEZEL}. Limited Quanities available. |
||
Bennett LS3000SK "Standard" Rocker Switch Assy.$0.00 BENLS3000SK ****NOTE**** This switch LS3000SK has been discontinued by Bennett Marine. (Measured 2-3/4" Square). Replace with new "Euro" switch # BENES2000SK. |
||
Bennett VC1000SK "JOY-STICK" CONTROL$0.00 BENVC1000SK ****NOTE**** This switch has been discontinued by Bennett Marine. Replace with new "Euro" switch # BENES2000SK. Note: VC1000 measured 2" square the ES2000SK is 2-3/4" square. 
 |
||
BENNETT RS1000 "ORIGINAL" ROCKER SWITCH $0.00 BENRS1000 ****NOTE**** This switch has been discontinued by Bennett Marine. Replace with new "Euro" switch # BENES2000SK.
|
||
BENNETT RT1000SK "RACING" TYPE CONTROL SWITCHBENRT1000SK ****NOTE**** This switch has been discontinued by Bennett Marine. Replace with new "Euro" switch # BENES2000SK. Note: The RT1000 measured 2-1/8" square the ES2000SK is 2-3/4" square. |
|
|
 |
local: (631)-722-5700
Partman & Partman.com are both registered trademarks of lighthouse Marine Distributors, Inc., Not responsible for typographical errors. Some merchandise may be limited in supply or available only by special order. Pictures are for illustrations purposes only, Prices are subject to change without notice.
29 Edgar Avenue - Riverhead, NY 11901 - toll free: 800-382-9335 - p: 631-722-5700 - fax: 631-722-5719 or Email: sales@partman.com