.jpg)
(RAW) WATER PUMPS (GAS ENGINES)
|
E35 Crusader Seawater PumpSHRE35 Crusader small and big block GM applications. Most popular Crusader Raw Water pump, used from 1975 untill late 1990's. All Crusader V-8's with end style exhaust manifolds. order replacement impeller kit SHR10615-K. |
40050 OR RA057031 RAW WATER PUMP FOR CRUSADER$425.00 SHRP1014 For Newer Model Crusader, GM, V-8 engines (Center Outlet Exhaust Models) models 270,350,454-XL and 502-XLi throttle body. Sherwood pump P1014, Crusader also uses part #'s 40050 and RA057031 for this pump. If needed in future order replacement impeller kit SHR10615-K. |
RA057028 CRUSADER 8.1L RAW WATER PUMP$326.70 RA057028 Crusader raw water pump for 8.1L engines. |
RA057032 PUMP CRUSADER 6.0-Liter$285.12 CRURA057032 New Crusader Orginal Equipment 6.0-Liter Raw Water Pump. (For replacement impeller and gasket order part #CRURP061022). |
46-72774A32 Mercruiser Raw Water Cooling Pump (Old Design)
4672774A32 Original Equipment Mercruiser Raw (Sea-Water) Cooling Pump, Most Inboards and most Bravo Sterndrives. "OLD" Design for "CAST IRON" mounting bracket. 1977 - 1981, will also install on later models with stamped steel mounting bracket. "click the name or image to see bracket type" |
46-807151A12 Mercruiser Raw Water Cooling Pump (New Design)
46807151A12 Original Equipment Mercruiser Raw (Sea-Water) Cooling Pump, Most Inboards and most Bravo Sterndrives. "NEW" Design for "STAMPED STEEL" mounting bracket. 1983 and newer. Note: this pump has 4-bolt "HUB" to accept orginal "VEE"-belt pulley. "click the name or image to see bracket type" |
46-807151A9 Mercruiser Raw Water Pump-Serpentine Belt 46807151A9 Mercruiser orginal equipment Raw Water Pump using a serpentine style pulley. Used on later Mercruiser Bravo and Mercruiser Inboards with SERPETINE Belt/Pullies. (wide flat belt) Pump is supplied with Serpentine Pulley. order replacement impeller kit 18-3150. |
46-807151A8 Mercuiser Raw Water Pump (with fuel pump mounting)46807151A8 Mercruiser Original Equipment Raw water Pump WITH fuel pump mounting flange. NOTE: This is NOT a popular pump, used on Mercruiser 454 and 502 CID GM Mark V and VI engines, the mechanical fuel pump mounted to raw water pump. Pump supplied with "VEE-BELT" pulley. |
18-3150 Kit Water Pump with Housing (Mercruiser Bravo and Inboards)18-3150 Water pump repair kit replaces 46-807151A14, for Mercruiser Bravo Sterndrives and Inboard engines. Includes "NEW" One-piece plastic housing, impeller, stainless plate, o'ring and bolts. Fits Mercruiser Inboard and Bravo Outdrive Pumps from 1983 and newer. (Pumps with aluminum "front" housing and plastic impeller body). |
46-862914T08 Mercruiser Raw water Pump 496 cu.in. and 8.1-Liter Base and HO 46862914T08 Late Model Mercruiser Big Block GM 496 cu.in. and 8.1-Liter, both BASE and HO models. Supplied with Serpentine Pulley. Also Replaces Mercruiser part # 46-862914A2. |
46-862914T10 Mercruiser Sea Water Pump NO-Air Fittings46862914T10 Mercruiser Sea Water Pump, 46-862914T10. Without air fittings. Fits MCM/MIE 4.3L MPI, 5.0L MPI, 350 MAG MPI, and MX 6.2L MPI with ECM 555. Superceeds old # 46-862914T3. |
46-862914T11 Mercruiser Sea Water Pump with Air Fittings46862914T11 Mercruiser raw water pump with air fittings Fits MCM/MIE 4.3L MPI 5.0L MPI 350 Mag MPI & MX 6.2L MPI w/ ECM 555. Repalces older part # 46-862914T4. |
G-7B Chrysler Seawater Pump 318/360/440SHRG-7B Chrysler LM318, LM360, AND M440 replacement pump with pulley replaces Sherwood G-5 AND G-7. One 1-1/4" inlet and one 1-1/4" outlet. Most popular Chrysler Raw Water pump. order replacement impeller kit SHR10615-K. |
D-75 SHERWOOD DUAL IMPELLER PUMPSHRD-75 Sherwood all bronze pump, dual impeller, (2) 1" in and (2) 1" out ports for hose connections. 5/8" shaft, Chrysler orginal part # 2847632, fits Chrysler M318 (M225X) marine engines. Only (1) at this price, close-out/final sale. |
D-60 Chrysler Seawater Pump M318SHRD-60 Chrysler double pocket (Dual Impeller) pump for LM 318/360. Pump has four 1" hose ports. Full Bronze Body comstruction. order replacement impeller kit SHR9959-K. *NOTE: this pump requires 2 SHR9959-K kits. |
D-55 Chrysler Seawater Pump-440SHRD-55 Chrysler double pocket (Dual Impeller) pump for 440. Pump has two 1" and two 1-1/4" hose ports. Full bronze body construction. order replacement impeller kits SHR9959-K, SHR10615-K. *NOTE: this pump require one of each kits. |
RA057007 (G21) Pleasurecraft Seawater PumpSHRG-21 Pleasurecraft FORD 5.0 and 5.8-Liter (302 and 351 CID) engines, pleasurecraft part # RA057007 and Sherwood pump #G-21, order replacement impeller kit SHR9959-K. |
Pleasurecraft Seawater Pump$480.00 RA057009 Pleasurecraft 350&454 GM seawater pump. Sherwood # G-55-2 order replacement impeller kit SHR10615-K |
G-30-2B Chris Craft Seawater Pump SHRG-30-2B Seawater Pump replacement for later model Chris Craft 305, 307 and 350 "K" series Chevy (GM) Small Block Engines. Pump has 1" hose fittings. This is a Full Bronze Pump. Supplied with "hub" for pulley attachment to hub with 4-bolts, pulley sold seperatly. Replaces Chris Craft part # 16.80-18346 and FI80-18346 also Jabsco pump #18830-0000. For Sherwood pump order replacement impeller kit SHR9959-K. |
G-15 SHERWOOD CHRIS CRAFT PUMPSHRG-15 Replaces "Early" Chris Craft 305, 307 and 350 "G and K" model engies, prior to engine serial # 181675. Replaces Chris Craft part #'s 16.80-18344 and FI80-18344, Inlet Port: 1", Outlet Port: 1", NOTE: "Pulley" is "pressed" onto shaft, that's the difference between the SHRG-30-2B and this G-15 pump. For Sherwood G-15 pump order replacment impeller kit order SHR9959-K. |
G-45-1 Chris Craft Seawater PumpSHRG-45-1 Chris Craft Replacement Seawater Pump for 454 cu.in. Big Block Engines. 1-1/4" hose fittings. Pulley is attached to hub with 4 bolts, pulley sold seperatley. order replacement impeller kit SHR10615-K. |
10-32621-2 Volvo Seawater PumpJP10-32621-2 Volvo AQ125, 131, 145 replacement pump for 4 cylinders engines. order replacement impeller kit JP09-801B |
G9901 Volvo\OMC Seawater Pump SHRG9901 Direct Replacement Seawater Pump for Volvo\OMC Engines. Replaces Volvo\OMC Part #3852398. This is an Original Sherwood Pump. Pulley is 6-1/2" diameter. order replacement impeller kit SHR9959-K. |
G9903 Volvo\OMC Seawater PumpSHRG9903 Direct Replacement Seawater Pump for Volvo\OMC Engines. Replaces Volvo\OMC Part #'s 3852399 & 3855079. This is an Original Sherwood Pump. Pulley is 4-1/4" Diameter. order replacement impeller kit SHR9959-K. |
10-24228-1 Front Mount Seawater Pump JP10-24228-1 Johnson Pump, Front Mount Crank Shaft Driven, Standard Equipment on Volvo, Pleasurecraft, and Marine Power "Small Block" Ford and GM (Chevy) V-6 and V-8 engines. (Replacement impeller kit JP09-1027B). DO NOT use this pump if Engine is Fresh Water Cooled, use JP10-24232-1 pump. |
10-24232-1 Front Mount Seawater Pump JP10-24232-1 Johnson Pump, Front Mount Crank Driven, with Larger Impeller. Used on Volvo and Marine Power Big Block GM (454 cu.in.) engines, ALL small block engines with fresh water cooling systems, and all Indmar engines. Has larger impeller than JP10-24228-1. (Replacement impeller kit JP09-812B). |
P105 Crankshaft Mounted Pump - SherwoodSHRP105 Sherwood pumps Crankshaft Driven Seawater pump. This is a universal pump used on many different applications. Replaces Pleasurecraft part #RA057026. Has 1-1/4" hose ports. order replacement impeller kit SHR10615-K. |
3812697 PUMP VOLVO-PENTA with "Vee" Belt Pulley$307.12 3812697 VOLVO-PENTA SEA WATER PUMP WITH "VEE"-BELT PULLEY. ALSO REPLACES VOLVO-PENTA PART # 3862487. FOR ENGINE MODELS: 4.3GL-A, 4.3GL-B, 4.3GL-C, 4.3GL-D, 5.0GL-A, 5.0GL-B, 5.0GL-C, 5.0GL-D, 5.0GL-E, 5.7GL-A, 5.7GL-B, 5.7GL-C, 5.7GL-D, 5.7GL-E. |
3812693 PUMP VOLVO-PENTA with "Serpentine" Belt Pulley (4.3, 5.0 and 5.7-Liter) $307.12 3812693 VOLVO-PENTA SEA WATER PUMP: ALSO REPLACES VOLVO-PENTA PART #'S 3857202 AND 3862482. (USES "SERPENTINE" PULLEY), Fits Engines: 4.3GXI-C, 4.3GXI-CF, 4.3GXI-D, 4.3GXI-DF, 4.3GXI-E, 4.3GXI-EF, 4.3OSI-C, 4.3OSI-CF, 4.3OSI-D, 4.3OSI-DF, 4.3OSI-E, 4.3OSI-EF, 5.0GXI-C, 5.0GXI-CF, 5.0GXI-D, 5.0GXI-DF, 5.0GXI-E, 5.0GXI-EF, 5.0OSI-C, 5.0OSI-CF, 5.0OSI-D, 5.0OSI-DF, 5.0OSI-E, 5.0OSI-EF, 5.7GI-C, 5.7GI-CF, 5.7GI-D, 5.7GI-DF, 5.7GI-E, 5.7GI-EF, 5.7GII-C, 5.7GII-D, 5.7GII-E, 5.7GXI-D, 5.7GXI-DF, 5.7GXI-E, 5.7GXI-EF, 5.7GXI-F, 5.7GXI-FF, 5.7GXII-D, 5.7GXII-E, 5.7GXII-F, 5.7OSI-B, 5.7OSI-BF, 5.7OSI-C, 5.7OSI-CF, 5.7OSI-D, 5.7OSI-DF, 5.7OSXI-B, 5.7OSXI-BF, 5.7OSXI-C, 5.7OSXI-CF, 5.7OSXI-D, 5.7OSXI-DF. |
3812694 PUMP VOLVO-PENTA with "Serpentine" Belt Pulley (7.4 and 8.2-Liter)$292.32 3812694 PUMP, VOLVO-PENTA CRANK MOUNTED, REPLACES PART #'S 3857203 AND 3862483. Fits 7.4 and 8.2-Liter Gi and GSi models. |
3812695 Pump Volvo-Penta 8.1-Liter (Early Models)3812695 Raw water intake cooling pump (early) Volvo-penta 8.1-Liter engines. Also replaces Volvo-penta part # 3862484, Note-pump has stamped flat metal bracket which helps support pump. 
 |
3812518 Pump Volvo-Penta 8.1-Liter (Later Models)3812518 Cooling or Sea Water Intake Pump for Volvo-Penta late model (2005 and newer), 8.1-Liter GM (Chevy) engines. NOTE-pump has "grommet" for support "wire" which helps support the pump.
|
FRONT MOUNT PUMP BRACKET GM (Chevy) Small Block93-0573 BRACKET FOR SMALL BLOCK GM (Chevy) Engines, 5.0 and 5.7-Liter. Use to secure front mounted pump's made by Johnson Pump, #'s JP10-24228-1 and JP10-24232-1, also Sherwood Pump SHRP105. |
FRONT MOUNT PUMP BRACKET GM (Chevy) Big Block$59.95 MP0572-000 BRACKET FOR BIG BLOCK GM, (Chevy) 7.4-Liter, 454 cu.in. engines. Use to secure front mounted pump's made by Johnson Pump, #'s JP10-24228-1 and JP10-24232-1, also Sherwood Pump SHRP105. |
FRONT MOUNT PUMP BRACKET -Ford (Small Block)$29.95 93-2001 BRACKET FOR SMALL BLOCK FORD. (302 and 351 cu. in.) (5.0-liter and 5.8-liter only). Use to secure front mounted pump's made by Johnson Pump, #'s JP10-24228-1 and JP10-24232-1, also Sherwood Pump SHRP105. |
BOLT KIT FRONT MOUNT PUMP GM (CHEVY) V-8'S93-V10K BOLT KIT FRONT MOUNTED PUMPS, ALL GM (CHEVY)- V8'S, USE TO SECURE FRONT MOUNTED PUMP TO CRANKSHAFT. (USE WITH PUMPS #JP10-24228-1, JP10-24232-1 AND SHRP105). |
BOLT KIT FRONT MOUNT PUMP SMALL BLOCK FORDS$11.50 93-V11K BOLT KIT FOR FRONT MOUNTED PUMP ON SMALL BLOCK FORDS (5.0 AND 5.8-LITER, 302 CU.IN AND 351 CU.IN.), TO SECURE PUMP TO CRANKSHAFT. (USE WITH PUMPS #JP10-24228-1, JP10-24232-1 AND SHRP105). |
BOLT KIT FRONT MOUNT PUMP TO BRACKET$2.49 93-V12K BOLT KIT TO SECURE BRACKET TO FRONT MOUNTED PUMP. (USE WITH PUMPS #JP10-24228-1, JP10-24232-1 AND SHRP105). |
43210-0001 Mercruiser Bronze Seawater Pump "V"-BeltITT43210-0001 Replacement Mercruiser Seawater Pump by ITT/Jabsco, ALL BRONZE direct replacement for Mercruiser Bravo and Mercruiser Inboards engines with standard "VEE-BELT", (Replaces Mercruiser part # 46-72774A32 & 46-807151A12), do not used on applications with serpentine belt or where fuel pump is mounted to the water pump. Pulley bolts to hub on pump shaft with 4-bolts, pulley is NOT supplied with pump. (will fit both old design "cast bracket" and new design "stamped steel" mounting bracket). If or when needed order replacement impeller kit ITT17954-0001. Made in USA. |
17954-0001 Kit Impeller (For Jabsco 43210-0001-pump)
$34.39 ITT17954-0001 The Impeller kit includes impeller and the associated o-rings and gaskets. To service Jabsco Bronze Pump #43210-0001. "Please click the name or image for a line dimension drawing". |
202M3 PUMP UNIVERSAL MOTORSOBR202M3 OBERDORFER NEW BRONZE ENGINE PUMP WITH RUBBER IMPELLER, FITS UNIVESAL (ATOMIC 4) MARINE ENGINES, CLOSE-OUT/FINAL SALE/QUANITIES LIMITED.
|
29 Edgar Avenue - Riverhead, NY 11901
toll free: 800-382-9335 - p: 631-722-5700 - fax: 631-722-5719 or Email: sales@partman.com