Dometic SA27254P Splashwell Mount Kit, 90°
This item is sold in PRE CUT 12.5' LENGTHS. Quantity equals ONE 12.5' LENGTH. i.e. Qty: 1 = 12.5'. The MAXIMUM shippable length is 7' (84").
**IF YOU ORDER ONE 12.5' LENGTH, IT WILL BE CUT INTO TWO 6' SECTIONS UNLESS OTHERWISE STATED BELOW**
This item is sold BY THE FOOT. Quantity equals ONE foot. i.e. Qty: 1 = 1', Qty: 5 = 5'. The MAXIMUM SHIPPABLE LENGTH iS 7' (84") ANY ORDER OVER 7' WILL BE CUT INTO TWO EQUAL LENGTHS.
Dometic SA27254P Splashwell Mount Kit, 90°.
Take control of steering without sacrificing splash protection. This cable connection is used on boats where standard tilt tube or
transom support mounting methods are precluded by a splashwell box or lack of engine tilt tube. The mounting surface is usually near perpendicular to the transom and between 12 and 16 inches from the center line of the boat and/or tiller (25-33” total splashwell width).
Features:
Bracket Degree: 90°
Not for through-transom or thru-hull use
Take control of steering without sacrificing splash protection. This cable connection is used on boats where standard tilt tube or
transom support mounting methods are precluded by a splashwell box or lack of engine tilt tube. The mounting surface is usually near perpendicular to the transom and between 12 and 16 inches from the center line of the boat and/or tiller (25-33” total splashwell width).
Features:
| Brand | Dometic Marine |
|---|---|
| Cross Reference / Specs | SEASTAR SOLUTIONS
USE WITH: |
PROPOSITION 65 WARNING: FOR MORE INFORMATION, VISIT WWW.P65WARNINGS.CA.GOV