Shields 200 Series 2-3/4" I.D. Marine Exhaust/Water Hose (No Wire)
This item is sold in PRE CUT 12.5' LENGTHS. Quantity equals ONE 12.5' LENGTH. i.e. Qty: 1 = 12.5'. The MAXIMUM shippable length is 7' (84").
**IF YOU ORDER ONE 12.5' LENGTH, IT WILL BE CUT INTO TWO 6' SECTIONS UNLESS OTHERWISE STATED BELOW**
This item is sold BY THE FOOT. Quantity equals ONE foot. i.e. Qty: 1 = 1', Qty: 5 = 5'. The MAXIMUM SHIPPABLE LENGTH iS 7' (84") ANY ORDER OVER 7' WILL BE CUT INTO TWO EQUAL LENGTHS.
Shields 200 Series 2-3/4" I.D. Marine Exhaust/Water Hose (No Wire) 12.5' Length.
Shields Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The
temperature ranges from -20°F – + 200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards.
Now double the ozone resistance required by SAEJ2006
I.D. 2-3/4" (70mm)
O.D. 3-17/64"
Ply 2
Shields Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The
temperature ranges from -20°F – + 200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards.
Now double the ozone resistance required by SAEJ2006
I.D. 2-3/4" (70mm)
O.D. 3-17/64"
Ply 2
| Brand | Shields Hose |
|---|---|
| Cross Reference / Specs | 16-200-2344 12-200-2340-1
|
PROPOSITION 65 WARNING: FOR MORE INFORMATION, VISIT WWW.P65WARNINGS.CA.GOV