Tie Down Engineering 94022 Danforth Hi-Tensile Anchor/35 lb
Tie Down Engineering 94022 Danforth Hi-Tensile Anchor.
The Danforth Hi-tensile is our toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick deep bottom penetration. Each shank is made from 4130 steel and then heat treated for extra strength.
Features:
Model Size: 35H
Anchor Weight: 35#
Holding Power: 3,800#
Hot dipped galvanized finish
For safe anchoring, a length of chain should be attached between the anchor line and anchor. This helps keep the anchor shank low and allows the flukes to further penetrate. Also gaurds against bottom chafe.
The Danforth Hi-tensile is our toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick deep bottom penetration. Each shank is made from 4130 steel and then heat treated for extra strength.
Features:
For safe anchoring, a length of chain should be attached between the anchor line and anchor. This helps keep the anchor shank low and allows the flukes to further penetrate. Also gaurds against bottom chafe.
| Brand | Tie Down Engineering |
|---|---|
| Cross Reference / Specs |
PROPOSITION 65 WARNING: FOR MORE INFORMATION, VISIT WWW.P65WARNINGS.CA.GOV