Shields 368 Series 1/4" Low Permeation Marine Fuel Hose
Shields 368 Series 1/4" Low Permeation Marine Fuel Hose per foot.
Shields Low Permeation Marine Fuel Hose has a plastic barrier veneer with an NBR outer layer tube to prevent permeation. This polyester reinforced hose complies with EPA and CARB very low permeation requirements and is weather/UV resistant. This hose is primarily used for fuel feed (gasoline up to 85% ethanol blended fuels/diesel/all bio-diesel blends). It meets USCG Type A1 – 15 requirements for pleasure boats and meets SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA/CE type accepted standards. The temperature ranges from -20°F to 212°F.
I.D. 1/4" (6.4mm)
O.D. 35/64" (13.72mm)
Max WP 100
Shields Low Permeation Marine Fuel Hose has a plastic barrier veneer with an NBR outer layer tube to prevent permeation. This polyester reinforced hose complies with EPA and CARB very low permeation requirements and is weather/UV resistant. This hose is primarily used for fuel feed (gasoline up to 85% ethanol blended fuels/diesel/all bio-diesel blends). It meets USCG Type A1 – 15 requirements for pleasure boats and meets SAE J1527 Type A1-15, ISO 7840 Type A1, and NMMA/CE type accepted standards. The temperature ranges from -20°F to 212°F.
I.D. 1/4" (6.4mm)
O.D. 35/64" (13.72mm)
Max WP 100
| Brand | Shields Hose |
|---|---|
| Cross Reference / Specs | 16-368-0140 12-368-0140-1
|
PROPOSITION 65 WARNING: FOR MORE INFORMATION, VISIT WWW.P65WARNINGS.CA.GOV